How To Tell If Radon System Is Working
How to tell if radon system is working. They will be able to determine why your system is not working. It is sometimes called a U-tube how clever. Radon will cause issues by being continuously exposed to it.
Homeowners in Cleveland with u-tube manometers installed as part of an active radon mitigation system should look to see if the liquid in the tube is uneven. The fluid is usually red blue or green. The U-tube can also indicate if your ground water sump is working properly.
If your radon mitigation system is not working you need to have the system checked out by a radon mitigation specialist. This will let you know if the radon fan is working or not. Since the system was put in I have had no problems with it and it is still running now.
The fan contains the only moving parts in a radon system but fans eventually wear out. The test results allow you to properly address the specific problems of a water supply. If you hear strange noises coming from the fan or it isnt moving at all then call us immediately so we can repair your system.
Similar to carbon monoxide radon is a gas that doesnt have a smell and you cant see it. Being in the business I know how easy it is to cheat on these tests. If your manometer is reading 0 on both sides of the mineral water inside of the tube the radon fan is no longer pulling any air from under the home.
The readout on the manometer should be between 05in 175in. Test for radon to verify if radon concentrations are less than 4 pCil If the results are 4. If your radon system has been at sub-zero temperatures for days in a row it can freeze and stop working.
A radon mitigation or abatement system uses a fan and a plastic pipe system to extract radon gas from under-house areas and expel this gas harmlessly into the atmosphere. This means no suction from the fan far left image and the radon mitigation system is not working.
They will be able to determine why your system is not working.
If your radon mitigation system is not working you need to have the system checked out by a radon mitigation specialist. That would answer the question if asked. The fan has a sensor and when it determines that it is about to overheat it shuts itself off although you may still hear it running. This is to ensure that the mitigation system is working appropriately and does not need to be adjusted. This means no suction from the fan far left image and the radon mitigation system is not working. Homeowners in Cleveland with u-tube manometers installed as part of an active radon mitigation system should look to. Dont worry this is supposed to happen. The fluid is usually red blue or green. If you hear strange noises coming from the fan or it isnt moving at all then call us immediately so we can repair your system.
Its a visual gauge that tells you if your radon fan is running and at what static pressure. So the system would indeed be drawing radon gas from the house. It is sometimes called a U-tube how clever. The fluid is usually red blue or green. That would answer the question if asked. If your manometer is reading 0 on both sides of the mineral water inside of the tube the radon fan is no longer pulling any air from under the home. The U-tube manometer or vacuum gauge primarily indicates the vacuum pressure inside the radon system.
Post a Comment for "How To Tell If Radon System Is Working"